As the end of September approaches, another High Speed door is fitted in Grimsby.
Category: Food Industry
-
Interlocked/Airlocked High Speed Door
This week we fitted a new high speed door in an animal feeds factory near Newark. The client asked us to create an Interlocked/Airlocked High Speed Door with an internal roller shutter also fitted by our team. The airlock has enabled the client to provide a controlled environment and preventing atmospheric contamination, the inner door is left open while product is stored by the outer door, only when the inner door is closed can the outer high speed door be opened giving the client access to the storage area.
-
Inflatable Dock Shelters Fitted to Food Sector Client in Hull
C & N Doors have recently completed an installation of 4 Inflatable Dock Shelters Fitted to Food Sector Client in Hull Area.
Benefits of an inflatable dock shelter over a traditional one are they have a longer life on the door as the curtain only inflates once the trailer is in position on the door, and gives a more secure seal around the trailer. This solution is ideal for any busy loading area, especially suited to areas where prevention of potential contamination is key, such as food production and pharmaceutical in addition to any area where loading is carried out and the inside of your bay needs protection.
-
Close the Door to Sunny March
March finished with a flourish of repairs, callouts and servicing. The usual unpredictable joy of our lives carries on, with forklifts being introduced to sectional doors and roller shutters plus a highspeed door deciding the safety features where no longer needed plus others.
Because at C & N we hold specialisms in a variety of door types, we have successfully been able to repair various types of industrial doors, while we offer our own branded doors highspeed doors, we can also service and repair many other makes. This particular highspeed door for one of our Hull based clients, provides essential sound insulation for a busy production area and needed to be back up and running as soon as possible, we were able to ensure the door was open and production could continue as efficiently as possible.
Another very urgent callout we attended was on an insulated roller shutter where the client had informed us that during the nightshift the door somehow had become bagged up and not coming down. When our engineers arrived onsite it was found that the door was bagged up and loose and all the top straps had bee broken, leaving the roller shutter door in a dangerous state. We were able to safely remove the roller shutter door from the hood and made the essential repairs and have it all up and running in the same day for the Hull based client.
A client in Grimsby who’s forklift driver had struck a roller shutter and unfortunately attempted use the door damaging the roller shutter further, we were able to attend site, strip it down and carry out the repair on the same day, ensuring the factory could be secured at the end of the day.
We were called out to Sheffield for an urgent job where belts had snapped on a highspeed door in a very busy food production area, again our engineers were able to get to site make the area safe and ensure the client could keep the area operational and make the repair with minimum downtime for the client. These jobs are in addition to our regular servicing, ensuring our clients roller shutters, sectional doors, highspeed doors etc are all up to specification and work safely and efficiently.
If you are based in the Yorkshire or Lincolnshire areas and need an efficient, professional and thorough service do not hesitate to give C & N Doors Services a call on 01482 666662.
-
Flexibility To Cover All Your Industrial Door Needs
It’s been a busy and varied start to the year for all us at C & N Doors from installing various types of new doors from Steel Door sets, insulated roller shutters, inflatable dock shelters and highspeed doors in locations across Yorkshire and Lincolnshire such as Hull and Driffield. In addition to being the only company able to give a rapid respond to a ram raid in Pontefract, providing the same day turn around, replacing all the panels and relevant hardware for a large sectional door, giving them the much needed piece of mind to be able to fully secure their business by the end of business that day.
-
New Year, Same quality service
New year, new ambitions and keeping the cold out with C & N helping you with all your industrial door needs
Happy New year to all our clients both current and soon to be. 2018 ended in a rush, as it always does, with customers eager to have repairs and installs all completed due to the Christmas rush, and with a lot of our clients in the food sector, this is by far their busiest time of the year. The Christmas break gave us time to reflect on the year that’s just gone, some of the successes and look where we can improve. With the office closed we still provided a call out to our clients, having to attend a number of sites during the break, all sectional doors at food factories, roller shutters at car sales and Barton Football club all needing to get up and running again. Possibly the most critical of these was Barton, due to this door allowing access to the bar from the stands! C & N are proud sponsors of Barton Football Club currently playing in the NCEL Premier league. We’ve recently bought them a new digital substitute board which is already being put into good use.
2019 will see us at C & N Provide an expert service to our clients and with an expanding team of professionals and product portfolio being able to a one stop solution for you industrial doors and loading bay accessories, we are able to provide the door, dock shelter, dock leveller, protection posts, dock buffers and all relevant safety equipment.
Pictured above:
C & N Doors Director Nick Kinroy handing over the substitute board to Mark Gregory Barton Football Club Chairman
-
New High Speed Doors to the Food Sector
The team have recently installed a number of new high speed doors to a client in the food sector with facilities in the Nottingham area. Enabling them to comply with all there DEFRA requirements, while also giving them easy, efficient and controlled access.
This particular set of doors had a number of needs. Firstly and their most basic function, they needed to be high enough to allow easy access to tipper trucks, but also have the facility to have the doors only open partially to allow entrance on foot without opening to their full extent. Additionally they were also interlocked with interior doors giving controlled access and atmospheric control. Plus for more efficient traffic flow and increase productivity, induction loops are fitted to allow the doors to automatically open when approached by a vehicle.
For any industrial door needs, from high speed doors to industrial roller shutters, do not hesitate to get in contact.em to comply with all there DEFRA requirements, while also giving them easy and efficient access and maximizing their production facility.
This particular set of doors had a number of needs. Firstly and their most basic function, they needed to be high enough to allow easy access to tipper trucks, but also have the facility to have the doors only open partially to allow entrance on foot without opening to their full extent, limiting. They were also interlocked with interior doors giving controlled access and atmospheric control. Plus for more efficient traffic flow and increase productivity, induction loops are fitted to allow the doors to automatically open when approached by a vehicle.
Due to the size of the doors they are strengthened with steel tubes to stop any bend in them giving easy operation particularly in windy conditions. They can come in a variety of colours to fit in with the building aesthetics.
For any industrial door needs, from high speed doors to industrial roller shutters, do not hesitate to get in contact or look at our page dedicated to high speed Roller shutters: http://candndoors.co.uk/high-speed-roller-doors/
